Tag Archives: wind generator blades

GudCraft WG700 12-Volt 3-Blade 700 Watt Wind Generator

… WG700 model is 700W 12 volt Wind Generator. Fresh 2011 Version just shipped from the factory. This is the latest design with 3 new blades. This item is new … Read more

First attempt at cutting wind generator blades form PVC (3)

wind generator blades form PVC (3)” src=”http://www.generatingwind.com/wp-content/uploads/55086_wind_generator_blades_default.jpg” /I have finished sanding down the first blade and will now work on the other 3, I have sanded them fully and … Read more

Vertical Offset Wind Generator Blade Design – Part #1

Here is a rough model of what I call a “vertical offset blade design” for a wind generator. I show only “4 levels”, however, more levels can be added. Essentially, … Read more

First attempt at cutting wind generator blades form PVC (2)

Here I rounded over the leading edge with my grinder and then used a orbital sander with fine grit paper, I ground down the trailing edge to almost a sharp … Read more

First attempt at cutting wind generator blades form PVC (1)

wind generator blades form PVC (1)” src=”http://www.generatingwind.com/wp-content/uploads/5f6b5_wind_generator_blades_default.jpg” /Here I cut a 2-1/2′ piece of schedule 80 PVC and added a furl to the bottom of the leading edge.

First … Read more

Wind Generator Blades 10.6 Feet 3.2 meters diameter No HUB

… wind generator blades are designed with high efficiency in transferring wind power to the mechanical power, Truly low wind speed, low TSR blades giving excellent performance and very low … Read more

Q&A: i need a site that sells aluminum wind generator blades?

… need a site that sells aluminum wind generator blades?
Best answer:
Answer by evil_angel360okay, you should first look on google, and then check ebay?
may the yellow pages?
… Read more