PART 25 DUAL PERMANENT MAGNET ROTOR AXIAL FLUX WIND TURBINE

PART 25 DUAL PERMANENT MAGNET ROTOR AXIAL FLUX WIND TURBINE

THE CONTINUATION OF THE DUAL PERMANENT MAGNET ROTOR AXIAL FLUX WIND TURBINE SERIES HAS BEEN A LONG TIME WAITING. IN THIS VIDEO, I ALSO SHOW THE 24 HOUR 7 DAY...


PART 25 DUAL PERMANENT MAGNET ROTOR AXIAL FLUX WIND TURBINE

17 Responses to PART 25 DUAL PERMANENT MAGNET ROTOR AXIAL FLUX WIND TURBINE

  1. Colin Hammill

    How much would you pay for a 50mm x 25 mm x 10mm neodymium magnet in the
    USA? They`re about £13.50 0r about $20 US each here.?

  2. Cwaynehawk

    Dang it, I’ve got to get to winding some coils or looking for some suitable
    hub and rotors. good to see ya get’n to it. very cool. Rock on
    MuDdymudmann. Very Pretty, I like it.:) Peace.

  3. Wolfsjger

    Wärst ein guter Politiker geworden, sprichst ziemlich viel.

  4. muddymuddymuddmann

    HEY STICKMAN DAN, GLAD YOU COULD DROP BY. AND THANKS FOR THE COMPLIMENT. I
    ACTUALLY HAVE THE SECOND ROTOR ON ALREADY, AND TESTED RPMs PER VOLT. IT
    TURNS OUT JUST SLIGHTLY BETTER THAN THE TARGETED VOLTAGE. I’M PRETTY
    MOTIVATED BY THE OUTCOME. BEST OF ALL… NONE OF MY TOOLS GOT WET DURING
    THE RAINY WEEK THIS TIME. AND ALL OF THE POWER TO WORK AT NIGHT, AND KEEP
    COOL CAME FROM THE SUN, EXCEPT FOR 2 MINUTES OF GENERATOR POWER FOR THE
    DRILL PRESS. LOOKING FORWARD TO HEARING FROM YOUR DAD. MUDDy

  5. muddymuddymuddmann

    OUCH! HAD TO WORK FOR A WHILE. NO ONE FUNDS MY EFFORTS. HOPEFULLY THIS TIME
    THINGS WILL CHANGE. AND I CAN DO A LITTLE CREATIVE MARKETING. MUDDy

  6. vesperhbtmotor

    Hay bud what a very long build and I must say a fun watch too. One pointer
    for you and all is an old trick my Grandfather thought me. If you have
    rusty parts and don’t want to spend all the hours cleaning sanding and
    buffing them there is a simple trick. SOAK IN WHITE VINIGER…….. I know
    it sounds weird but it works every time a day or so of a soak takes years
    of rust off. I hope to hear from you in response to my videos on my
    channel. And would like to formally invite you on Teep forum.

  7. muddymuddymuddmann

    GRACIAS LUIS, THANK YOU VERY MUCH. AND I WISH FOR YOUR PROJECT TO BE
    PERFECT. GOD BLESS YOU. MUDDy

  8. fireball570

    Enjoyed the video Muddy! Part 25, you’ll be 90 by the time you finish that
    thing haha.

  9. Grant Slayton

    Great to see a new post on alternative power. Your results without a huge
    budget are inspirational to this DIY’r. Keep it up.

  10. James Biggar

    glad to see you’re back at it :) nice work, thx for the upload! looking
    forward to seeing what the second rotor does

  11. muddymuddymuddmann

    HEY JOE, GOOD TO HEAR YA. I’M GONNA USE PINE 2 X 8 5 FOOT BLADES. I THINK
    10 FOOT PROP WILL DO JUST FINE. I THINK I WANT TO DO A FOUR BLADED PROP.
    ALSO MAYBE A 3 BLADE. THANKS. MUDDy

  12. muddymuddymuddmann

    I HOPE YOU MEANT THAT IN A NICE WAY. MY GOAL IS TO HELP. GOD BLESS YOU.
    MUDDy

  13. vesperhbtmotor

    Yes it is worth a try But watch out for gassing from the acid and electric
    sources. But good Idea. Well ventilated area for sure there.

  14. muddymuddymuddmann

    HEY RADIO SUPER STAR, THIS WAS THE MORNING OF THE KNIGHTS OF THE ROUND
    ROOMS TNS RADIO SHOW. SORRY TO HAVE MISSED IT. I ALSO FINISHED THE SECOND
    ROTOR INSTALL. THE TEST WAS ON TARGET. SWEET EXCITEMENT FOR ME. I’M WORKING
    ON PART 26 NOW. MUDDy THANKS OH GREAT MAD SCIENCE DUDE. WEEEE!

  15. muddymuddymuddmann

    HEY HAWK, GLAD TO HEAR FROM YOU. I’M PRETTY EXCITED ABOUT THIS ONE. THE
    TOTAL VOLTAGE AT 120 RPMs IS JUST A BIT OVER THE PROJECTED PLAN. NOTHING
    AND ADDED 1/8th INCH EXTRA SPACING ADJUSTMENT WON’T CURE IF NEEDED. OR EVEN
    ADDING AN EXTRA LENGTH OF FEED WIRE BEFORE GOING INTO THE BATTERY BANK.
    UNTIL THEN I WILL LEAVE IT AS IS UNTIL I SEE IF THE BLADES STALL OUT.
    ADDING LEAD WIRE TO THE SYSTEM IS EASY AND WILL INCREASE THE POWER OUTPUT
    BELIEVE IT OR NOT. IT ALLOWS BLADES TO SPEED UP TO CATCH WIND.

  16. stickmenpictures

    Will do my best! Cheers :D

  17. Wolfsjger

    Yes, nice. Have a nice day

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>