our website www.mwands.com In this video Missouri Wind And Solar is demonstrating there new wind turbine motor running with 7, 9 and 11 Raptor Generation 4 blades. We show the speed, amp and volt output. This new wind turbine motor will come in a 7 and 14 magnet model, 12, 24 and 48 volt. Were also proving that more blades, like 11 that we designed, have enormous torque and extreme low statup speed . 11 Raptor g 4 blades are used on hard to turn pma's. You don't need 3 large blades to do the job, 11 smaller blades can do the same as 3 large with one exception, 11 raptors can hit extremely high rpms and not explode. 3 large blades cannot, and are not meant for high speeds, that's why 3 large blades have to furl out of the wind say at 30 mph winds or they would simply explode. 11 Raptor g 4 blades can keep going to 125 mph, no problem. therefore no furling or mechanical breaking is nessasary. Our road test was done with a resistive load not batteries. We are setting up dealers for our new pma's. We will have a listing on our website, Find a dealer near you. Jeff, Missouri Wind And Solar
newest wind turbine motor on the market from Missouri Wind And Solar
440 Amp 10,000 watt charge controller 12 volt 4 wind turbine generator solar pv
 | US $89.00 (1 Bid) End Date: Saturday May-19-2012 18:10:56 PDT Bid now | Add to watch list |
FALCON aluminum wind turbine generator blades and hub 17 mm hole fits delco pma
 | US $69.00 (0 Bid) End Date: Saturday May-19-2012 18:13:29 PDT Bid now | Add to watch list |
ALL IN ONE charge controller BOARD 24 volt for wind turbine and solar panel USA
 | US $649.88 (2 Bids) End Date: Saturday May-19-2012 18:15:38 PDT Bid now | Add to watch list |
11 Raptor Generation 4 wind turbine generator blades and hub made USA
 | US $129.00 (0 Bid) End Date: Saturday May-19-2012 18:18:32 PDT Bid now | Add to watch list |
Incoming search terms
Related posts:
- 3 phase ac wind turbine charge controller and brake switch Missouri Wind And Solar
- Treadmill Motor Wind Generator Turbine 1
- What items have a motor that is good for a wind turbine generator?
- PV Insider: Light at the End of the Tunnel for the US PV Market
- DIY Solar Energy: Homemade Solar & Wind Power System
@jerrydesaulniers Thank you Jerry
Nice video Jeff from Jerry of Vortex Wind Funnel
@TheFrankenstein320 It was done in DC. It’s an AC output rectified to DC
was this done in ac or dc voltage???? like the vidio,,real stuff,,MADE IN USA
Is you “MPH” accurate or do you have an ASI mounted? If you do show it.
Love the R&D you’re doing let’s keep it honest as it seems.
@DWAdkins53 Thank you. I’m always trying to advance, always trying to make something better. The ones that seem to spend all there time critisizing me and what i build have no ideas of there own, just opinions. Anyway thanks again Dave.
Jeff
Jeff great new machine. Love the hard hitting facts not smoke and mirrors.
@TheBillythekid2010 Let me tell ya, Ampstowatts is Bob Greene, owner of Hydrogen Appliances, Thermodyne. He told on himself with Scumies newest video # 39.
Scummie searcher is crusin for a brusin.Along with Wind Bag Nation that pulls his strings. Patience and i will fix there ass soon enough. It doesnt matter what i say or do there right there like politicians, twistin and spinnin the facts.
Hey Jef, I’m glad you did this vid on a calm day . It was great to show actual startup of blades on all the test’s ! Ass for Watts said that you had winds already blowin and did’t include the mph from the truck speed, jackass . Him and scamsearcher are at scams cabin getting a freak on, LOL. Still as always a great vid_Billy
@lifesaverservant only if your driven…
When This baby hits 88 miles-per-hour, gonna see some serious OUTPUT!
Were setting up dealers for our new pma’s. coming soon.
Jeff
Jeff – Great videos & I have learned a lot – thanks! I especially like the grid tie-in. Looks easy to do. But, I am kind of all over the place on what to get. If using grid-tie, why not use 48 volts and a 1500 watt PMA? Wouldn’t that give you the most bang for the buck? I have an average 11.5 mph wind at ground level. Isn’t the power output the cube of the wind speed? Do I have to get the wind really up in speed in order to see significant power output? Thanks!
Jeff once again you have proven your products above and beyond with real data as always! I hope that Captain Ahab and abacus boy had some time to watch your video and learn how it is done!
@STARFIRESOLAR I need to correct what i said, I meant to say that if enough money or time is spent on a blade it can be balanced. No one is going to spend that kind of money on a inexspensive wind turbine prop. Helicopter blades, 2, aircraft blades ,4 are a different story altogether. To balance say 2 aluminum blades for a small wind turbine is something a manufacture is not going to do, that includes the 2 blade windblue.
Jeff
@jeffmolly1 You’re doing great work with these props and PMA’s one of these days I want to buy one. As far as I can see yours looks to be the best built. I do have to disagree with you saying even number props CANNOT be balanced. My friend, Yes they can. ANY prop can be balanced. I used to fly a plane that had a 2 blade and another plane that had a 4 blade prop. I assure you, they were perfectly balanced. Someone may not know how to balance them, but that doesn’t mean they can’t be balanced.
@jeffmolly1 Your better off getting more low winds (most common) more often using an 11 blade then occasional start ups in higher winds just long as your PMA can generate the 12V on low RMP. Yeah??
I just wish someone would put together a torque needed to start PMA test graph and outputs off each set up. A good clear easy to understand graph to compare them all.
I ended up getting my Mississipi Wind Turbine through a dealer in Australia. Good Video. That’s Rock Roll. Walking the talk keep em honest Gef.
@indman101 Thank you. Wind turbines are cheaper and can run 24 hours a day, solar panels are more exspensive and you can get 8, 10 hours a day from them. Wind is the best bang i guess, it’s good to have both wind and solar, somethings always putting out power.
Jeff
whats a better bang for the buck between solar power or wind power here in southern Indiana?living in a township im not sure how far up by code I could install a wind generator nice video.
@STARFIRESOLAR That was my intent, 7 blades are faster than 9 or 11 creating higher rpms thus more output.
11 blades have more torque and lower startup speed than 7 does. When a pma starts putting out alot of amps it needs some torque behind it or it will stall. 11 blades have the torque to operate larger pma’s that a 7 blade can’t begin to turn.
Even numbers of blades like 4, 6 ,8 ,10 and 12 that are on the market CANNOT be balanced. A California company is copying me and using even numbers
@jeffmolly1 Thanks for the reply Jeff. By the way I know your a square shooter and I hope those in your niche of the market learn that you have good intentions. Keep up the good work!
Hell yeah.
Awesome wish it was mine.
I like your stuff Jeff! But from what you just showed on your “real output test” the 7 blade outperformed the 11 blade model. By your own test results, 11 blade @ 35mph = 1200 Watts while the 7 blade @ 35mph = 1800 Watts. Looks like the 11 blade model is not as efficient. The 7 blade model was 30% MORE efficient!
Have you done this same test on a 3, 4, 5, 6 baldes? Just curious. You talk about clean air, but when you have too many blades it disturbs the airflow at the prop. Doesn’t it?