www.maglevwindturbine.com Demo CGI for proposed 2GW Magnetic Leviatated wind Turbine. *Efficient Frictionless Power Generation with less maintenance, compared to HAWT. No oil change or replacement of the bearings, gears. Since, MAGLEV does NOT require such. ** Current bearing technology has forced wind turbine designers into horizontal spindle three bladed wind turbines. In this design the huge blades are connected to a spindle in the center. The bearings that support the spindle and control the pitch of the blades (which can be hundreds of feet long) see huge pitch-moment loading, some of which is manifest as torque energy that is focused through the center spindle. The target speed for the spindle is 18 or 20 rpm and the bearings holding the spindle are mounted in a huge casting which also contains a large gearbox stepping the speed up to 1800 to 2000 RPMs which allows for the proper surface speed relationship between the coils and magnets. It is necessary to invert or condition the current, which is expensive. This gearbox is full of many large bearings, gears and castings; for a 2 MW turbine the gearbox can easily weigh 30 tons. This gearbox needs to be mounted on the top of a pole more than 150 feet in the air and be able to support the turbine blades under full-force wind conditions. ***MAGLEV Power Generation, the pitch moment ratio is closer to 1-to-1 then the 100-to-1 as with a horizontal spindle design.
Maglev Wind Turbine
Wind Turbine Generator Kit 900W Max 12/24V Option Aerogenerator 5 Blades NEW
 | US $730.00 (1 Bid) End Date: Sunday May-20-2012 3:01:50 PDT Bid now | Add to watch list |
NASA - LANGLEY RESEARCH CENTER - RESEARCH LIBRARY - WIND TUNNEL VORTEX TURBINE
 | US $1,900.00 End Date: Sunday May-20-2012 3:36:52 PDT Buy It Now for only: US $1,900.00 Buy it now | Add to watch list |
Wind Turbine Technology NEW by A.R. Jha
 | US $165.15 End Date: Sunday May-20-2012 3:46:24 PDT Buy It Now for only: US $165.15 Buy it now | Add to watch list |
WIND POWER TURBINE Power Generator Car Truck Vinyl Decal Window Sticker M312
 | US $9.99 End Date: Sunday May-20-2012 3:47:22 PDT Buy It Now for only: US $9.99 Buy it now | Add to watch list |
WIND POWER TURBINE Power Generator Car Truck Vinyl Decal Window Sticker M312
| US $9.99 End Date: Sunday May-20-2012 3:47:22 PDT Buy It Now for only: US $9.99 Buy it now | Add to watch list |
Incoming search terms
maglev wind turbine;briza technologies wind energy;buy a mag lev wind turbine;maglev alternator;maglev turbine technology;maglev vawt;
Related posts:
- 2010 Deep Research Report on China Wind Turbine Gearbox Industry
- newest wind turbine motor on the market from Missouri Wind And Solar
- Feasibility Analysis of China New Wind turbine Gearbox Projects
- Briza Technologies Introduces a New Patent Pending for Wind Turbine: The Hovering Wind Turbine.
- What is the monthly yield on a 60K wind turbine if it’s planted in a wind farm?
QUESTION: Can you give the approximate dimensions of the structure? Just a guess, but by using the train and transmission towers as a reference, my guess is 700 to 1,000 feet.
2 JIGAWATS GREAT SCOTT !
since the whole assembly is magnetically lifted I wonder how u keep it from just blowing away off of the platform since there is nothing holding it down ??..highly unstable…u would need structure to keep it in place even if it had a central axis
Zapraszam zobacz mój vawt.
I invite you to see my VAWT
Frania 7, Frania 9.
Wiechu123
Thats awseome. ….I’m sure one will be built …maybe a fraction of the size ….and in a terrible location. If its a government that buys one that is.
This has been around since the 70′s
And No one bought it then
And then cover the entire thing in Solar panels!
how does it it levitate and not fall over or be blown around?
@Phacias It’s not the same thing at all. Friction is a much bigger loss of energy. And drag isn’t because of magnetic fields.
@9hello123 Indeed, it is not. I got better education in the subject and inquired it was called ‘drag’. The same thing tough.
@misterbonzai08 We have several large wind turbines in North Cornwall. Curiously they always seem to turn at the same speed! Self synchronous is the reason. Incidentally the Delabole wind farm produced as much energy as 50,000 tons of coal in its first ten years. OK one oil tanker could carry a lot more energy in one trip but why waste perfectly good wind?
@rickadlib Doesn’t use electromagnets.
@Zamboro Anyone that isn’t happy to pay for a project like this is either old with no children, young and an idiot, or old and doesn’t give a shit about his children.
@Phacias That’s not friction.
@techdavey1000 No it hasn’t lol.
@carnagecat8 You can also use Cinema 4D for 3D objects
@ztcrown They still need cooling??????????
@Anvilshock “They come in a variety of sizes at reasonable prices!” Ah now I get what you are saying. That is a quote from our “Gas Price” video. Making fun of the same cheesy advertisers. Thanks for the smile.
@Anvilshock So as many people as possible will understand what is being said.
True Free energy devices exist,But the coverup is very strong,Find the real deal, a free energy device at LT-MAGNET-MOTORdotCOM ,Let the revolution begin!
@wolfsledgend Yeah as long as your 1 inch diameter of your magnet x the 300 foot tower weighs less than 100kg’s…Most of the earth magnets I am use too can loose their magnetism from environmental factors as well…i.e… lighting and movement(shock)…
@fronteraroja001 maglev is fine but you have to take into account inertia. something that big is going to take a lot of force to move from a stand-still position regardless if it’s on a frictionless bearing. also you have to take into account the generator it’s running which also has a lot of inertia as well as magnetic resistance and friction as you try to spin it up. plus the amount of friction on current wind turbines isn’t really a huge stumbling block, they’re pretty efficient already
@Everfalling they use the maglev technology, so it’s frictionless, that means they are way more efficient than the traditional wind turbines, and need way less wind to start moving to start producing energy.
i don’t see how making one huge turbine in one place is more efficient than many turbines spread over a wider area. In the video on the front page of the website you even include sails to capture a wider area of wind into the turbine. what if the wind blows beyond your 100 acre plot? you have a dead turbine. also the benefit of smaller turbines is that it doesn’t take much to get them going whereas this beast looks like it’d take a gale if not at least very strong winds all the time.
@dedshaw1612wifi have you ever tried to make two of those magnets about an inch in diameter touch eachother? near imposible you can ad about 100kg and those litle mignets still wont touch so this could be done easy