- UL recognized class 200 Product (High temperature Class: 200°C/392°F)
- Premium quality Essex magnet wire in original factory spool, Conforms to NEMA MW-35C standard
- Insulation type: modified polyester basecoat and an improved polyamideimide topcoat
- AWG size: 18 AWG, round. Average Shipping Weight: 11 lbs
- Insulation type: polyester-polyamide-imide, polyester basecoat, polyamide-imide topcoat.
Product Description
In original factory packaging. Made and spooled by Essex.
UL recognized Class 200 magnet wire
Essex is the worlds largest producer of magnet wire
Why should you buy original Essex factory magnet wire spool ?
Original factory spool is professionally wound by the magnet wire manufacturer. Unprofessional re-spooling can easily damage or scrape the insulation film, damaged magnet wire can not be used for coil winding. Poorly re-spooled wires can ultimately reduce coil winding quality.
Dimensional Data
Nominal Diameter: 0.0431 inch
Nominal OHMS/LB. -20 Celsius: 1.271
Feet/LB: 199
Technical Specifications:
Conforms to MW-35C, UL recognized Class 200
High temperature Class: 200°C (392°F)
AWG size: 18 AWG, round
Insulation type: modified polyester basecoat and an improved polyamideimide topcoat
Insulation build: heavy build, more durable than single build
Approximate Shipping Weight Range: 10 lbs to 13 lbs
Magnet Wire Spool Weight: 9 to 12 lbs
Applications:
Wind Generators
Fractional and Integral HP Motors
Hermetic Motors
DC Motors
Power Tools
Automotive Alternators and Generators
All Dry Type Transformers, Class 105 through 200
Electronics, All Types of Coils, Class 105 Through 200
Arts & Crafts
This type of Essex magnet wire is the standard of comparison for magnet wire performance in virtually every severe and heavy duty application. The combination of a modified polyester basecoat and an improved polyamideimide topcoat results in an insulation system with outstanding physical toughness, excellent dielectric properties, and superior chemical resistance to most common solvents and refrigerants.
Windability of this type of Essex magnet wire, verified by years of experience on virtually every type of winder, has always been excellent. Improvements in the topcoat have resulted in a product that is even more superior with regard to high slot fill and insertability.
Note: Shipping Weight for each spool varies, it normally ranges from 10 to 13 lbs
For more information: AWG18 Essex Magnet Wire - Winding Wire - Enameled - 18 Gauge, 11 LB avg. Shipping Weight
Related posts:
- 2″x2″x1″ N50 Rare Earth Neodymium Block Magnet
- Northern Power Systems Introduces New 2.3 MW Permanent Magnet Direct Drive Wind Turbine
- Where can I buy magnets and wire to make a wind turbine at home?
- Generator works at the winding of a generator stator in a new addition to TVA’s hydroelectric plant at Wilson Dam, Sheffield vicinity, Ala. Located 260 miles above the mouth of the Tennessee River, the dam has an authorized power installation of 288,000 k
- PART 4 DUAL PERMANENT MAGNET ROTOR AXIAL FLUX WIND TURBINE